Do Hillstreams Jump?
Moderator: LoachForumModerators
Do Hillstreams Jump?
Do hillstreams jump?
One of the other recent threads got me thinking about tank design... since I've had so much free time lately. (winter break)
So I'm wondering... why not have a little stream in your house? Why stick with a glass tank?
Some day I'll be able to have a house, I hope, and I think it would be cool to have some sort of "water feature" in the place.
It would be interesting to put together some kind of small indoor pool/fountain with a "stream" running into it.
Of course you wouldn't be able to look at the fish from the side, but if you had some big smooth rocks in your "stream" and the water was clear, I dunno why it would be hard to see the fish.
But of course, if they jump, the whole idea is moot.
One of the other recent threads got me thinking about tank design... since I've had so much free time lately. (winter break)
So I'm wondering... why not have a little stream in your house? Why stick with a glass tank?
Some day I'll be able to have a house, I hope, and I think it would be cool to have some sort of "water feature" in the place.
It would be interesting to put together some kind of small indoor pool/fountain with a "stream" running into it.
Of course you wouldn't be able to look at the fish from the side, but if you had some big smooth rocks in your "stream" and the water was clear, I dunno why it would be hard to see the fish.
But of course, if they jump, the whole idea is moot.
- Martin Thoene
- Posts: 11186
- Joined: Wed Dec 28, 2005 5:38 am
- Location: Toronto.....Actually, I've been on LOL since September 1998
- Emma Turner
- Posts: 8901
- Joined: Wed Dec 28, 2005 5:07 pm
- Location: Peterborough, UK
- Contact:
- palaeodave
- Posts: 1370
- Joined: Mon Jul 24, 2006 5:25 am
- Location: London/York
I've not seen mine jump, but they do stick their little faces out of the water along the glass to catch floating bloodworms or anything else they think is interesting above the surface. I've taken to leaving about an inch margin in the water level just in case.
books. gotta love em!
http://www.Apaperbackexchange.com
http://www.Apaperbackexchange.com
- Jim Powers
- Posts: 5208
- Joined: Wed Dec 28, 2005 6:15 pm
- Location: Bloomington, Indiana
I was acclimating some gastromyzons in a 2 gallon tank using the drip method. The tank was plastic and didn't have a lip on it. As soon as I took the lid off the first time several of the gastros swam at high speed up the tank side (still suctioned to the side) and went flying up in the air and landed on the carpet. I must say I was shocked. All survived the escape attempt.

- Emma Turner
- Posts: 8901
- Joined: Wed Dec 28, 2005 5:07 pm
- Location: Peterborough, UK
- Contact:
- palaeodave
- Posts: 1370
- Joined: Mon Jul 24, 2006 5:25 am
- Location: London/York
Thats dedication! What sort of dimentions is it going to be? And will it be sunken into the ground or raised up with glass sides? (Sorry if I'm hijacking this thread!)Emma Turner wrote:Oh, they're way off yet.palaeodave wrote:How are plans for the indoor pond comming, Emma?Got to have an extension built on the house with a conservatory first!
You could have a cross section or river/ creek with two distinct ends and a glass side. You would go broke trying to pump the amount of flow required to keep the level consistant. Figure that for every one inch of depth at 24 inches of width=71.9gpm. This is based on the Francis formula.
Q=3.33 (L-0.2H) H1.5
Q=cubic ft of water flowing per second
L= lenght of opening or weir in feet
H= head of weir in feet
Now figure that you would need about 700 gpm for a ten inch deep river. The pump would need to be around 15 hp based on a 12x1.5 inch impeller. 24/7/365 the cost to run the pump would be in the thousands. I have thought this over and run the numbers. Its a novel idea though.
Q=3.33 (L-0.2H) H1.5
Q=cubic ft of water flowing per second
L= lenght of opening or weir in feet
H= head of weir in feet
Now figure that you would need about 700 gpm for a ten inch deep river. The pump would need to be around 15 hp based on a 12x1.5 inch impeller. 24/7/365 the cost to run the pump would be in the thousands. I have thought this over and run the numbers. Its a novel idea though.
Hello all from Happy River
I have lost count of how many tanks I have
I have lost count of how many tanks I have
I learned this the hard way, by trial and error on my rivertank project. I am up to about 2.5 inches in dept of flow but I had to shorten the width of the flow area from 15" to 4.5" to about 3.5". I also added a pump and plan to add another for a total of 3. Tell you one thing, loaches love a high flow current.chris1932 wrote: Figure that for every one inch of depth at 24 inches of width=71.9gpm. This is based on the Francis formula.
120 gallon planted aquaponic tank with 10 clown loachs, first one since 1994, 1 modesta and 3 striadas.
Who is online
Users browsing this forum: Google [Bot] and 134 guests